The second-largest of 4 ‘Classic’ submersible phone cases.
Perfect for iPhone 6 and most Samsung Galaxy S phones.
The original waterproof phone case – and still the best!
What’s so special about this case?
You’ll be able to talk and hear through it without a problem
and get great photos and video
and your touchscreen will work normally
It’s not just 100% waterproof – it’ll protect your phone from dust, dirt and sand too
You won’t necessarily have to buy a new one when you upgrade your phone, because it’s a generic rather than a form-fit case (unlike a hard case, it’s not tailored to a specific device).
What else do I need to know?
Some smartphones can be very sticky. Please watch our video which shows how to get a phone in and out of the case without it getting stuck (see Useful Videos tab above).
Some phones will float in this case and some won’t – make sure you test yours in a basin before you launch it into the sea!
Capacitive touchscreens don’t work underwater, the water breaks the circuit. But you can use the volume buttons to operate your camera underwater.
Fingerprint recognition such as Apple’s Touch ID won’t work through the Aquapac – you will have to enter your passcode.
Some phones have rather sharp edges. We recommend use of a thin bumper case which will protect both phone and case.s this the right size for my phone?
Check out the Size Guide at the top of the page. It lists most phones and tells you which Aquapacs fit them best.
If you do have a bumper case on your phone and want to keep it on when it’s in the Aquapac you may need a wider case.
If it’s not in the list, or you’re still not sure which Aquapac is best for you, don’t be shy – just ask us!
Waterproof Phone Case – Small iPhone 6
- Waterproof Rating submersible Submersible
Colour Cool Grey with Acid Green Lanyard
Materials TPU with optically-clear LENZFLEX™ lens window.
Weight Case: 1.2oz / 35g
Lanyard: 0.2oz / 7g
We call this the ‘Small Whanganui’ – it’s named after a whitewater river in New Zealand.
This case is 100% PVC-free. It is made of a special TPU which is thin enough for you to use your touchscreen, but still remarkably strong.
The seams are high-frequency welded to form a super-strong bond.
The Aquaclip® seal opens and closes with a quick twist of two levers. And everything stays in one piece even when it’s open.
We patented the Aquaclip system back in the 1990s. We have sold over 5 million Aquapacs, the vast majority of which are sealed with an Aquaclip. So you can have confidence that the waterproofness of our system is well-proven!
Caution: It’s not foolproof. If you’re not careful you could get a hole in the case, or let water in when opening it. But as long as you treat it sensibly and carefully it should give you many years of use.
Do please check out the Care Instructions (two tabs to the right!)