Bike Mounted Waterproof Phone Case Mini iPhone 6
S$99.00 Regular Price
Bike-Mounted Phone Case – Mini
Waterproof rating: Submersible
The smaller of two submersible phone cases that attach to handlebars, and to helm bars on yachts.
Perfect for iPhones up to and including iPhone 6.
What’s so special about this case?
No tools required – designed to be attached with your fingers only
You’ll be able to talk and hear through it without a problem
and your touchscreen will work normally
It’s not just 100% waterproof – it’ll protect your phone from dust, dirt and sand too
You won’t necessarily have to buy a new one when you upgrade your phone, because it’s a generic rather than a form-fit case (unlike a hard case, it’s not tailored to a specific device).
What else do I need to know?
You can get great video with your front-facing camera. The bike mount attachment means that there is no room to fit a lens window on the back of this case, so you cannot use a rear-facing/iSight camera. Sorry!
Some smartphones can be very sticky. Please watch our video which shows how to get a phone in and out of the case without it getting stuck (see Useful Videos tab above).
Some phones will float in this case and some won’t – make sure you test yours in a basin before you launch it into the sea!
Capacitive touchscreens don’t work underwater, the water breaks the circuit. But you can use the volume buttons to operate your camera underwater.
Fingerprint recognition such as Apple’s Touch ID won’t work through the Aquapac – you will have to enter your passcode.
Some phones have rather sharp edges. We recommend use of a thin bumper case which will protect both phone and case.
It should fit the handlebars of all bicycles, some motorbikes, and also to the helm bars on yachts.
DetailsWaterproof Rating submersibleSubmersible
Colour Cool Grey
Materials Case: TPU
Mount: nylon and stainless steel
Weight Case: 1.5oz / 44g
Mount: 1.3oz / 36g
This case is 100% PVC-free. It is made of a special TPU which is thin enough for you to use your touchscreen, but still remarkably strong.
The seams are high-frequency welded to form a super-strong bond.
The Aquaclip® seal opens and closes with a quick twist of two levers. And everything stays in one piece even when it’s open.
We patented the Aquaclip system back in the 1990s. We have sold over 5 million Aquapacs, the vast majority of which are sealed with an Aquaclip. So you can have confidence that the waterproofness of our system is well-proven!
Caution: It’s not foolproof. If you’re not careful you could get a hole in the case, or let water in when opening it. But as long as you treat it sensibly and carefully it should give you many years of use.
Do please check out the Care Instructions (two tabs to the right!)